Differences

This shows you the differences between two versions of the page.

--- glossary:atcdemo2 [2013/04/11 13:48] – [Configurations for the ATC] Bob Vetterlein
+++ glossary:atcdemo2 [2013/04/11 13:59] – [Shuttle Demo - ATC & CSR4] Bob Vetterlein
@@ Line 1: / Line 1: @@
 ====== Shuttle Demo - ATC & CSR4 ======
-The shuttle module or ATC (Automatic Train Controller) comes preprogrammed with a number of different configurations, selectable using an on board 4 way DIL switch. The track on this [[exhibition_stand|demonstration]] board is a symetrical arrangement that allows all of these configurations and the module cycles through these.\\
+The shuttle module or ATC (Automatic Train Controller) MERG Kit 46, comes preprogrammed with a number of different configurations, selectable using an on board 4 way DIL switch. The track on this [[exhibition_stand|demonstration]] board is a symetrical arrangement that allows all of these configurations and the module cycles through these.\\ The track is Kato Unitrack, the points have integral motors using a two wire arrangement where the direction of current flow determines direction in which the points are set. The points here are driven by PD3s, MERG Kits 37a & 37b.
 ==== Configurations for the ATC ====
   - A: End to end, plain track with stopping place at each end.