Latching can apply to both mechanical devices and electronic circuits.
An example of mechanical latching would be a push on / push off switch, see here. See also description of a latching relay. (e.g. relay)
An example of an electronic latch would be a flip-flop or bistable circuit.
A standard relay may be made self latching by supplying a current path for the coil through one of its normally open contact sets.
Layout Command Control (LCC) s a system for controlling all the functions on your layout that don’t have to do with how fast the locomotive is moving – things like signals, or sounds, or passenger car lighting. LCC is NMRANet, just under a different name. LCC is designed as a separate, generic control bus which is positioned to take the load off your throttle bus. It is a bi-directional data bus that can send and receive data. Since it is an NMRA Standard, you are not confined to one manufacturer's products. Any manufacturer can make LCC compatible devices.
This is a change in the content of solder. Lead free solder is generally recommended due to Health and Safety considerations, but 60:40 tin:lead is preferred for electronic kits and is still available from suppliers such as Rapid Electronics.
A German DCC system and decoder manufacturer.
Last in First out, data buffer where the most recent entry is the first to be retrieved. Commonly referred to as a 'Stack' it is used to save the return address (Program Counter) and other data that must be restored when a Sub Routine terminates.
A DCC decoder made especially for lights for a loco or carriages.