User Tools

Site Tools


glossary:hysteresisloop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
glossary:hysteresisloop [2013/04/14 05:46]
Bob Vetterlein
glossary:hysteresisloop [2013/04/15 13:39]
Bob Vetterlein
Line 1: Line 1:
 ====== Hysteresis Loop - RPC Demonstration====== ====== Hysteresis Loop - RPC Demonstration======
  
-The track on this demo is divided into 8 sections, these are monitored for occupation using a DTC, MERG Kit 56. The two points are driven using PMR1 kits, one is clearly visible in the foreground of the [[exhibition_stand|photo]],​ mounted on the point motors are switches which are used to feed back the actual point position via a SRI4 kit. The signals, which are for demonstration only and are not intended to be scale models, consist for the most part of 4 LEDs which are individually driven by a SRO4 kit. The loco is DCC fitted and is driven from a custom built DCC Command station, not available as a kit. All the modules, with the obvious exception of the PMR1s, are contained within a [[hystloopbox|control box]] which is connected to the demo by three cables, two of which are visible in the photo. The PMR1, SRI4 & SRO4 kits are part of a range known as RPC (Remote Panel Control) and were designed before the Kit Locker existed in its current form and as a consequence are only available from Gordon Hopkins.+The track on this demo is divided into 8 sections, these are monitored for occupation using a DTC, MERG Kit 56. The two points are driven using PMR1 kits, one is clearly visible in the foreground of the [[exhibition_stand|photo]],​ mounted on the point motors are switches which are used to feed back the actual point position via a SRI4 kit. The signals, which are for demonstration only and are not intended to be scale models, consist for the most part of 4 LEDs which are individually driven by a SRO4 kit. The loco is DCC fitted and is driven from a custom built DCC Command station, not available as a kit. All the modules, with the obvious exception of the PMR1s, are contained within a [[hystloopbox|control box]] which is connected to the demo by three cables, two of which are visible in the photo. The PMR1, SRI4 & SRO4 kits are part of a range known as [[rpcsystem|RPC]] (Remote Panel Control) and were designed before the Kit Locker existed in its current form and as a consequence are only available from Gordon Hopkins.
glossary/hysteresisloop.txt ยท Last modified: 2014/11/11 13:29 (external edit)