User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
public:cbuspublic:start [2020/01/22 15:29]
grovenor [Introduction]
public:cbuspublic:start [2020/01/22 19:17] (current)
grovenor [CBUS Documentation]
Line 1: Line 1:
 ===== CBUS - A universal layout control system ===== ===== CBUS - A universal layout control system =====
-[[public:​cbuspublic:​docindex|Documentation]]\\  +
-[[public:​cbuspublic:​schema|Schema files]]\\ ​+
 [[:​public:​start|Index to other public Wiki pages]]\\ ​ [[:​public:​start|Index to other public Wiki pages]]\\ ​
 ==== Introduction ==== ==== Introduction ====
-CBUS is a Layout Control System running on the [[wp>​CAN_bus|CAN]] (Controller Area Network). A description of the system can be found on our public webpages. +CBUS is a Layout Control System running on the [[wp>​CAN_bus|CAN]] (Controller Area Network). A brief description of the system ​and available kits can be found on our public webpages. 
-cbus.php and cbus2.php+  * **[[https://​​merg_resources/​cbus.php|CBUS]]** ​and  
 +  * **[[https://​​merg_resources/​cbus2.php|CBUS2]]** ​
 +A complete description of CBUS including the full specification and implementation notes is contained in the '​Developer'​s Guide',​ see link below. ​
 +  ​
-{{  http://​​cbus.png?​100|}} +===== CBUS Documentation ​===== 
-===== CBUS in Brief ===== +This is the public view of CBUS and does not include MERG Technical Bulletins (TBs) or links to any other MERG Copyright material which is available only to members. 
-This is a short overview, mostly useful ​to someone generally informed in the area, and wishing ​to understand specific details about CBUS.+ 
 +[[developerguide|CBUS Developers'​ Guide]]\\  
 +This Guide is intended for those with technical knowledge wishing to develop additional hardware, software and firmware for use with CBUS. It also provides all the technical background and information to enable a better understanding of how CBUS worksalong with the rationale for our choices ​and methods.  
 +[[jmriacccmd|Commanding Accessory Decoders using CANCMD & JMRI]] 
 +This description shows how to use CBUS events to operate DCC accessory modules via the CANCMD. 
-CBUS is a local area bus designed for model railways and it is used for the control of layout accessories and DCC trains. The message is entirely self contained and independent of any transport used. It is currently specified to run over [[wp>​CAN_bus|CAN]] (Controller Area Network). This three wire bus system is widely used, notably in many cars and trucks. 
-A CBUS installation consists of a number of '​nodes'​ which send messages to each other. ​ It uses the '​Producer-Consumer Model' and '​events'​. ​ Some change on the layout will trigger a '​Producer'​ node to send an event-message to a '​Consumer'​ node, which then causes some action to take place. ​ For example, a occupancy detector causes the node to which it is connected to send an event-message. ​ This message is received by another node which controls a signal, and causes the signal to display Red.  ​ 
-In situations where the Producer / Consumer model is inappropriate,​ CBUS has an alternative '​device addressed'​ mode. Here each device on a layout is given a unique number in the range 1 to 65535. Both producer devices and consumer devices can have the same number, e.g. a switch controls a turnout, both would share the same number. This scheme gives a lot of flexibility and is suited to PC control, and where there are multiple '​producers',​ like CABs, which control layout devices such as turnouts or routes. 
-===== Identifiers ===== 
-  - **Nodes** are the basic unit of CBUS, and each is usually implemented on one PCB. Node-ids are 16-bit, and are assigned by the user. 
-  - **Event** messages are sent by '​Producer'​ nodes and received by '​Consumer'​ nodes to cause some action. ​ Event-numbers are assigned by the user, and are one of two kinds: 
-    * Short-event:​ 16-bit device# 
-    * Long-event: 32-bit, made up of the concatenation of a node-id and a 16-bit event#​. ​ 
-    * They are distinguished by the opcode of the message. ​ Each is further qualified as an '​On'​ or '​Off'​ event by that opcode. 
-===== Message Formats ===== 
-   ​General format is 8 bytes: { opcode, optional data }  
-      Where the opcode informs the receiving node what to do, using the data as necessary.  ​ 
-      There are many opcodes, including: 
-         - On-Events and Off-Events 
-         - Train control, including programming 
-         - Node configuration 
-   Long Event format is:  { opcode, [node-id(2).event#​(2)] },  
-      Where the concatenation [node-id.event#​] is considered to be one 32-bit event. 
-   Short Event format is: { opcode, node-id(2), device#(2) },  
-      Where node-id and device# are independent. The device# is considered a '​short-event'​ or device#​. ​ 
-      More than one node can send this event, e.g. throttles, and it will have the same effect.  ​ 
-      By convention, device#s 1-9999 denote '​action'​ events; 10001-19999 the matching denote sensor events; 
-      and device# 10000 the `Start-of-Day'​ (SoD) event.  ​ 
-        ​ 
-      The reason for this partition is that CABs can send short events up to 9999 and it would not be 
-      advisable for these to clash with sensor events by mistake. 
     ​     ​
 ===== Tools: ===== ===== Tools: =====
Line 50: Line 32:
   * **SSI** (Solid State Interlocker) from [[http://​​|GPPSOFT]]:​ A complete layout control system following British signalling and control practice.   * **SSI** (Solid State Interlocker) from [[http://​​|GPPSOFT]]:​ A complete layout control system following British signalling and control practice.
-===== Implementation Notes ===== 
-  * CBUS operates over CAN at 125kbps. 
-  * CAN is bidirectional and has built-in error correction and message re-send. 
-  * CBUS CAN frames have an 11-bit header and an 8-byte data-part.  ​ 
-    * The data-part carries the CBUS message.  ​ 
-    * The header must be unique, and this is ensured by including the 1 byte CAN-ID assigned to the sending node.  
-  * The CAN-ID is retained by the node, moving it to a new layout may cause a CAN-ID conflict. ​     ​ 
-  * In SLiM mode, the node-id is set by switches, and the CAN-ID is set equal to the low-byte of the node-id.  ​ 
-  * In FLiM mode, if the node does not have a CAN-ID, one is automatically obtained by self-enumeration:​ the node asks all other active nodes for their CAN-ID, and then assigns itself one that is not in use.  
-    * NB: New modules //must// be introduced to the bus one at a time.    ​ 
-  * The CAN-ID may be re-assigned:​ manually by a double push of the node's pushbutton; or by using the FCU.  ​ 
-  * CBUS uses 29-bit header CAN messages for bootloading.  ​ 
-  * A complete description of CBUS including the full specification and implementation notes is contained in     the '​Developer'​s Guide' which can be downloaded from  {{ :​public:​cbuspublic:​developer_6b.pdf |}} See also the '​documentation'​ link at the top of this page. 
-  ​ 
public/cbuspublic/start.1579706956.txt.gz · Last modified: 2020/01/22 15:29 by grovenor