This is an old revision of the document!
Table of Contents
Next Meeting |
---|
There are 1571 days 12:43 since the next Virtual Meeting (18:30 GMT on 18th February 2020) |
MERG Virtual Area Group
To send us an email, use the MERG Area Group contact form
For MERG members, you might also like to look at our area group forum.
Area Group Coordinator
Allan Geekie M5173 - email address: vag@merg.org.uk
How It Works
This group now uses Zoom to conduct a group meeting from member's homes or workplaces. It was formed in October 2018 to assess the usefulness of video conferencing technology.
The calls last one hour and to participate, members need a mobile phone, tablet or a PC / Mac with a camera and microphone. Recently we have started to enable members to join by telephone if they have limited broadband facilities.
In order to join the group you need to send an email to Allan at vag@merg.org.uk.
Calls are scheduled in advance and are held on the second and fourth Tuesday of each month at 10:00GMT or 10:00BST. Topics are agreed in advance.
When it is time to start a call, a voice and video conference is opened up which has thumbnails of each video participant and any shared presentations or desktops. The call leader facilitates the call and the discussions and tries to get through the agenda in the agreed time. Zoom has two views available. The first is the speaker view which selects the video stream from the person speaking. The second is Gallery view which shows streams from all participants.
Members are participating from:-
- Australia
- Canada
- Iceland
- Ireland
- UK
- USA.
Members can access the presentation material here.
If you would like to try out Zoom, then there is a test meeting service where you are the only participant and you can experiment with the various options available.
This link is available to anybody, not just members of the virtual area group.
Next Meeting
There are 1571 days 12:43 since the next Virtual Meeting (18:30 GMT on 18th February 2020)
The proposed agenda is as follows
Tuesday 11th February 2020 10:00 GMT
Topic | Leader | Notes |
---|---|---|
Changing Points | All | A general discussion on the topic of changing points - I guess we will start with a finger! |
Once you have confirmed with the leader that you wish to participate, you will receive a reminder email on the day before the call and a second email 10 / 15 minutes before the call with a link to enable you to join.
Future Meetings
Calls are held on the second third and fourth Tuesday of each month at 10:00GMT or 18:30GMT. The calls scheduled
Agendas exist for some future meetings - these may change.
Suggestions for additional topics would be welcome.
Some discussion topics may move if needed.
Date / Time | Topic | Topic Lead |
---|---|---|
February | ||
25th 10:00 GMT | What is on our Workbenches? | All |
March | ||
10th 10:00 GMT | 3D Resin Printing | Chris Walsh and Roger Woodward |
17th 18:30 GMT | Colour Light Signals | All |
24th 10:00 GMT | Journal Discussion | All |
April | ||
14th 10:00 BST | What is on our Workbenches? | All |
21st 18:30 BST | Semaphore Signals | All |
28th 10:00 BST | Arduino Discussion | All |
May | ||
14th 10:00 BST | Fusion 360 | Dave McCabe |
21st 18:30 BST | DC Control | All |
28th 10:00 BST | Raspberry Pi Discussion | All |
June | ||
9th 10:00 BST | Success with Surface Mount Devices | Duncan Greenwood |
16th 18:30 BST | TBA | All |
23rd 10:00 BST | TBA | All |
July | ||
14th 10:00 BST | TBA | All |
21st 18:30 BST | TBA | All |
28th 10:00 BST | TBA | All |
August | ||
14th 10:00 BST | TBA | All |
21st 18:30 BST | TBA | All |
28th 10:00 BST | TBA | All |
September | ||
14th 10:00 BST | Signalling | Dave McCabe |
21st 18:30 BST | What is on our Workbenches? | All |
28th 10:00 BST | TBA | All |
There is a standby list of topics that appear regularly:-
- MERG Update
- Last Journal
- Our Layouts
- Our Projects
- Helping Beginners
- Kit Surgery
- 3D Printing
- Blue Pill Microcontrollers.
Previous Meetings in 2020
Tuesday 11th February 2020 10:00 GMT
Topic | Leader | Notes |
---|---|---|
CANV* Modules | Ian Hart | Ian will talk about the new CANV range of modules, now in production and about to appear in the Kitlocker |
Tuesday 28th January 2020 10:00 GMT
Topic | Leader | Notes |
---|---|---|
Radio Throttles Discussion | All | A general discussion around wireless communication with hand-held throttles. |
Tuesday 21st January 2020 10:00 GMT
Topic | Leader | Notes |
---|---|---|
MERG in 2020 | Martin Perry | MERG Chairman, Martin Perry discusses what MERG will be doing in the coming year. |
Tuesday 14th January 2020 18:30 GMT
Topic | Leader | Notes |
---|---|---|
Train Detection Discussion | All | A general discussion around train detection using light, lasers, magnets, current consumption and any other ideas that members can devise |
Previous Meetings in 2019
Tuesday 17th December 2019 18:30 GMT
Topic | Leader | Notes |
---|---|---|
Layout Wiring | All | A general discussion on the basics of wiring a layout |
Tuesday 10th December 2019 - 10:00 GMT
Item | Leader | Notes |
---|---|---|
Journal Feedback | Allan | We will take a few minutes to gather some feedback regarding the December Journal |
Tales from the Kitlocker | Judi Rastall | A good opportunity to learn more about this essential part of MERG |
26th November 2019 18:30 GMT
Item | Leader | Notes |
---|---|---|
Video Recording of VAG calls | All | My original of a policy is not working due to space restrictions at Zoom; we need to agree a policy; I can provide an update on the recent problems. |
19th November 2019 18:30 GMT
Item | Leader | Notes |
---|---|---|
DCC PMP Kits Discussion | All | This is the first of the evening discussion callsd. We weill start with PMP DCC kits but see where it takes us. |
12th November 2019 10:00 GMT
Item | Leader | Notes |
---|---|---|
Merg Feedback | Allan | Feedback from the Thirsk event and AGM |
Getting Started with PlatformIO | Dave McCabe | What is PlatformIO? |
October 22nd
Item | Leader | Minutes | Notes |
---|---|---|---|
Designing PCBs | Alan Turner | 30 | |
MERG Online | Martin Sebborn | 30 |
October 8th
Item | Leader | Minutes | Notes |
---|---|---|---|
Journal - The Road to JMRI series | Allan | 40 | |
Challenge the Group | All | 20 | This is an opportunity to ask the group for help with problems on your layout or with electronics in general |
24th September
Item | Leader | Minutes | Notes |
---|---|---|---|
More Wires or More Modules | Discussion | 40 | Duncan lit the blue touchpaper on the Forum |
10th September
Item | Leader | Minutes | Notes |
---|---|---|---|
Journal Feedback | Discussion | 5 | Initial discussion while members join the call |
MERG Update | Allan | 5 | Update from the last committee meeting |
CBUS for Beginners | Discussion | 20 | How to progress the idea of helping CBUS adoption for new users |
TTH CANCAB | Discussion | 30 | General discussion |
27th August
Item | Leader | Minutes | Notes |
---|---|---|---|
Future Topics | Discussion | 5 | Initial discussion while members join the call |
Station Destination Boards | Discussion | 45 | An opportunity to discuss hardware and messaging systems |
Burning Topics | Discussion | 10 | Does anybody need some help? |
13th August
Item | Leader | Minutes | Notes |
---|---|---|---|
Future Topics | Discussion | 5 | Initial discussion while members join the call |
DC Control | Discussion | 45 | An opportunity to discuss the forgotten world of DC control |
Burning Topics | Discussion | 10 | Does anybody need some help? |
9th July
Item | Leader | Minutes | Notes |
---|---|---|---|
Future Topics | Discussion | 5 | Initial discussion while members join the call |
Signalling Objects for CBUS | Dave Turner | 55 | The aims of this White Paper are as follows |
1 To make configuration and documentation of an interlocked system easier | |||
2 To add the following higher level functionality to the existing CBUS messaging system | |||
- System initialisation | |||
- Interlocking of modelled signalling items | |||
- Route reservation, locking and release | |||
- Reporting of operational errors |
25th June
Item | Leader | Minutes | Notes |
---|---|---|---|
Future Topics | Discussion | 5 | Initial discussion while members join the call |
General Discussion | All | 45 | CANEMPTY, 3D Printing Java FCU, Rocrail, stiction controllers, wifi controllers, CBUS module reset and Duncan's latest servo setter. |
Burning Topics | Discussion | 10 | Does anybody need some help? |
11th June
Item | Leader | Minutes | Notes |
---|---|---|---|
Journal Feedback | Discussion | 5 | Initial discussion while members join the call |
DCC Decoder for Under a Fiver | Duncan Greenwood | 45 | Duncan will talk about the work he has been doing on hardware and firmware for a DCC loco decoder |
Burning Topics | Discussion | 10 | Does anybody need some help? |
28th May
Item | Leader | Minutes | Notes |
---|---|---|---|
Future Topics | Discussion | 5 | Initial discussion while members join the call |
On my Workbench | Discussion | 25 | What are we all working on. |
CBUS - long messages 2 | Discussion | 20 | Potential solutions |
Burning Topics | Discussion | 10 | Does anybody need some help? |
14th May
Item | Leader | Minutes | Notes |
---|---|---|---|
Future Topics | Discussion | 5 | Initial discussion while members join the call |
Blue Pill Talks to CUS | Dave McCabe | 45 | Dave takes up the challenge to show how a simple program on a Blue Pill module can communicate with CBUS |
Burning Topics | Discussion | 10 | Does anybody need some help? |
23 April
Item | Leader | Minutes | Notes |
---|---|---|---|
Etiquette | Discussion | 5 | Initial discussion while members join the call |
PMP Project Ideas | Discussion | 25 | What would we like to see as future PMP projects? |
CBUS - long messages 1 | Discussion | 20 | Problem Definition |
Burning Topics | Discussion | 10 | Does anybody need some help? |
9th April
Item | Leader | Minutes | Notes |
---|---|---|---|
Future Topics | Discussion | 5 | Initial discussion while members join the call |
Workbenches | Discussion | 25 | What are members working on at the moment? |
Layouts | Discussion | 20 | Share information on the layouts we are contributing to |
Burning Topics | Discussion | 10 | Does anybody need some help? |
26th March
Item | Leader | Minutes | Notes |
---|---|---|---|
From the Workbench | Discussion | 5 | Initial discussion while members join the call |
Getting Started with Blue Pill Microcontrollers | Dave McC | 25 | Quick intro to Blue PIll( inc schmatic ) |
Arduino IDE | |||
Blue pill config | |||
Compiling code | |||
Flashing using ST-Link | |||
Debugging | |||
Any Questions | Discussion | 10 | Let us all try and help one another with any 'burning platforms' |
Future Topics | Discussion | 5 | What topics would we like to discuss in future calls |
12th March
Item | Leader | Minutes | Notes |
---|---|---|---|
Last Journal | Discussion | 5 | Initial discussion while members join the call |
CBUS | TBA | 40 | TBA to include Layouts with large numbers of modules |
Any Questions | Discussion | 10 | Let us all try and help one another with any 'burning platforms' |
Future Topics | Discussion | 5 | What topics would we like to discuss in future calls |
26th February
Item | Leader | Minutes | Notes |
---|---|---|---|
MERG Update | Allan | 5 | Feedback from last committee meeting |
3D Printing | Howard | 40 | (1) Filament |
* Makes | |||
* Types | |||
* Storage | |||
(2) Creating a model | |||
* Design Software | |||
* Correction software | |||
* Slicing software | |||
(3) Printing in more than one colours | |||
* Change filament at certain depth | |||
* Separate objects glued together | |||
* Multi material | |||
(4) 3D Printers | |||
* Makes | |||
* Bed Levelling | |||
* Nozzles | |||
(5) What can go wrong (if time permits)? | |||
Any Questions | Discussion | 10 | Let us all try and help one another with any 'burning platforms' |
Future Topics | Discussion | 5 | What topics would we like to discuss in future calls |
12th February
Item | Leader | Minutes | Notes |
---|---|---|---|
Interesting Forum Threads | Discussion | 5 | Initial discussion while members join the call |
A MERG Newsletter | Discussion | 25 | Discussion about a new way of communicating with members |
Helping Beginners | Allan | 15 | Discussion about what beginners need to know about resistance |
Any Questions | Discussion | 10 | Let us all try and help one another with any 'burning platforms' |
Future Topics | Discussion | 5 | What topics would we like to discuss in future calls |
22nd January
Item | Leader | Minutes | Notes |
---|---|---|---|
MERG Update | Allan Geekie | 5 | Feedback from last committee meeting |
Layouts | Discussion | 25 | Updates from the group on the electronics on the layouts they are working on |
Projects | Discussion | 25 | Projects from the group's workbenches |
Future Topics | Discussion | 5 | What topics would we like to discuss in future calls |